-
Siltronic AG has achieved its annual guidance for 2024 at the upper end of expectations based on preliminary, unaudited figures. The company reported preliminary sales of EUR 1,413 million, a decline of about 7 percent compared to the previous year (2023: EUR 1,514 million). The target for the reporting year was a high single-digit percentage decrease in sales.
The main reason for the year-over-year decline was weaker demand from the semiconductor industry due to continued high inventory levels, particularly at chip manufacturers. Despite the ongoing demand weakness for the second consecutive financial year, Siltronic recorded only a slight decrease in sales prices. As a result, a preliminary EBITDA of EUR 364 million (2023: EUR 434 million) and thus a continued solid EBITDA margin of 26 percent (2023: 29 percent) was achieved. This margin was also at the upper end of the guided range of 24 to 26 percent.
“Despite a challenging market environment, we achieved our guidance and demonstrated our resilience with an EBITDA margin of 26 percent, thanks to targeted cost reduction measures. For the year 2025, we anticipate that the growth in the end-markets, primarily driven by AI, will not yet be reflected in our wafer demand due to the persistently elevated inventory levels in the value chain. Therefore, we expect H1 2025 to be significantly weaker than H2 2024,” commented Dr. Michael Heckmeier, CEO of Siltronic AG.
Compared to the previous year, cost of sales decreased at an underproportional level to sales due to lower fixed cost dilution and higher depreciation. As expected, earnings before interest and taxes (EBIT) were significantly lower year-over-year at EUR 125 million (2023: EUR 231 million). The preliminary EBIT margin was 9 percent compared to 15 percent in 2023.
Net cash flow improved due to lower capex
In the year under review, capex including intangible assets was significantly reduced to EUR 523 million (2023: EUR 1,316 million). The majority of investments continued to relate to the new 300 mm wafer fab in Singapore, which was commissioned at the beginning of 2024 and will now be ramped over several years.
Due to the ongoing demand weakness and the still elevated project-related investments, the preliminary net cash flow for 2024 remained negative at EUR -297 million, but improved significantly compared to the previous year (2023: EUR -664 million). As a result, net financial debt increased to EUR 733 million as of December 31, 2024 (2023: EUR 356 million). This includes the dividend payment of EUR 36 million for 2023.
Business performance in Q4 2024
Preliminary Q4 2024 sales of EUR 361 million were slightly higher than Q3 (EUR 357 million), supported by a stronger US dollar. Preliminary EBITDA for Q4 2024 of EUR 93 million exceeded the previous quarter’s level (Q3 2024: EUR 89 million), mainly due to the improved FX result. The preliminary EBITDA margin was 26 percent (Q3 2024: 25 percent). With a planned slight increase in depreciation, the preliminary EBIT in Q4 2024 amounted to EUR 27 million (Q3 2024: EUR 29 million). Preliminary net cash flow for Q4 improved significantly to EUR 21 million (Q3 2024: EUR -65 million). This improvement is mainly due to better operating cash flow and timing differences between payment dates and the accounting of capex. Preliminary capex for Q4 amounted to EUR 116 million (Q3 2024: EUR 94 million).
Guidance for the financial year 2025
Despite the forecast for continued end market growth in the current financial year, inventory levels at chip manufacturers and their customers are only slowly decreasing. This continues to delay the expected wafer demand recovery. The Executive Board therefore expects demand to remain subdued and no sales growth in 2025. Assuming unchanged exchange rates, sales are expected to be in the region of the previous year. According to current estimates, the first six months of 2025 will be the most affected, as customer volume shifts from long-term contracts will also partly occur from the first to the second half of 2025.
The sales guidance takes into account the announced closure of wafer production for diameters up to 150 mm in Burghausen, which is now scheduled for July 31, 2025. This will have a slightly negative impact on sales and a negligible impact on earnings compared to the previous year.
The EBITDA margin is expected to be in the range of 22 to 27 percent. The cost of ramping the new fab will be partially offset by savings in energy and other areas.
At this point, Siltronic’s visibility remains very limited. A more detailed guidance is expected to be provided with the publication of the Annual Report on March 6, 2025.
Mid-term ambition delayed due to postponed demand recovery
The demand recovery assumed in the mid-term ambition (published at the Capital Markets Day in 2023) did not materialize in 2024, and the current financial year also continues to be characterized by subdued growth prospects. As a result, the mid-term ambition of generating sales of more than EUR 2.2 billion and an EBITDA margin in the high 30’s by 2028 will likely not be realized until a later point in time.
Despite these developments, Siltronic is convinced of its medium-term growth potential. Key drivers of this growth are megatrends such as Artificial Intelligence, Digitalization, and Electromobility which will lead to a strong increase in demand for semiconductors and thus also for wafers.
Dividend proposal of EUR 0.20 per share
Due to the continued demand recovery delay, the Executive Board proposes to the Annual General Meeting on May 12, 2025, a reduction of the dividend to EUR 0.20 per share for the financial year 2024. Based on the preliminary figures, this corresponds to a payout ratio of approximately 10 percent of the consolidated net income attributable to Siltronic shareholders.
“The freed-up funds will flow into our future investments to increase the long-term value of Siltronic. Despite the ongoing demand weakness, it is important to us that our shareholders continue to participate in the company’s success,” said Claudia Schmitt, CFO of Siltronic AG.
Original – Siltronic
-
Infineon Technologies AG reported results for the first quarter of the 2025 fiscal year (period ended 31 December 2024).
“Infineon has held up well in a weak market environment, closing its first quarter slightly ahead of expectations,” says Jochen Hanebeck, CEO of Infineon. “Against a continued uncertain economic backdrop, our business trajectory in this fiscal year is following the pattern we expected: Following the expected inventory reduction, we continue to anticipate that the recovery in demand will be gradual for the current fiscal year. The positive stand-out is the move towards increased use of artificial intelligence, which is driving demand for our leading power supply solutions for AI data centers. This is a prime example of our long-term growth drivers, digitalization and decarbonization.”
- Q1 FY 2025: Revenue €3.424 billion, Segment Result €573 million, Segment Result Margin 16.7 percent
- Outlook for Q2 FY 2025: Based on an assumed exchange rate of US$1.05 to the euro, revenue of around €3.6 billion expected. On this basis, Segment Result Margin forecast to be in the mid-teens percentage range
- Outlook for FY 2025: Based on an assumed exchange rate of US$1.05 to the euro (previously US$1.10), revenue is now expected to be flat to slightly up (previously: to decline slightly) compared with the prior year. The adjusted gross margin should be around 40 percent and the Segment Result Margin in the mid-to-high-teens percentage range. Investments of approximately €2.5 billion planned. Free Cash Flow adjusted for investments in frontend buildings should be around €1.7 billion and reported Free Cash Flow around €900 million
Original – Infineon Technologies
-
NXP Semiconductors N.V. reported financial results for the fourth quarter and full-year, which ended December 31, 2024.
“NXP delivered full-year 2024 revenue of $12.61 billion, a decrease of 5 percent year-on-year. In the fourth quarter, revenue was $3.11 billion, a decrease of 9 percent year-on-year, modestly above the mid-point of our guidance range. In review, NXP delivered resilient results throughout 2024, reflecting solid execution, consistent gross margin, and healthy free cash flow generation despite a challenging market environment. We rigorously focus on managing what is in our control, to navigate a soft landing while executing our growth strategy,” said Kurt Sievers, NXP President and Chief Executive Officer.
Key Highlights for the Fourth Quarter and Full-year 2024:
- Fourth quarter revenue was $3.11 billion, down 9 percent year-on-year. Full-year revenue was 12.61 billion, down 5 percent year-on-year;
- Fourth quarter GAAP gross margin was 53.9 percent, GAAP operating margin was 21.7 percent and GAAP diluted Net Income per Share was $1.93. Full year GAAP gross margin was 56.4 percent, GAAP operating margin was 27.1 percent and GAAP diluted Net Income per Share was $9.73;
- Fourth quarter Non-GAAP gross margin was 57.5 percent, non-GAAP operating margin was 34.2 percent, and non-GAAP diluted Net Income per Share was $3.18. Full-year Non-GAAP gross margin was 58.1 percent, non-GAAP operating margin was 34.6 percent, and non-GAAP diluted Net Income per Share was $13.09;
- Fourth quarter cash flow from operations was $391 million, with net capex investments of $99 million, resulting in non-GAAP free cash flow of $292 million. Full-year cash flow from operations was $2,782 million, with net capex investments of $693 million, resulting in non-GAAP free cash flow of $2,089 million;
- During the fourth quarter of 2024, NXP continued to execute its capital return policy with the payment of $258 million in cash dividends, and the repurchase of $455 million of its common shares. The total capital return of $713 million in the quarter represented 244 percent of fourth quarter non-GAAP free cash flow. On a trailing twelve month basis, capital return to shareholders represented $2.4 billion or 115 percent of non-GAAP free cash flow. The interim dividend for the fourth quarter 2024 was paid in cash on January 8, 2025 to shareholders of record as of December 5, 2024. Subsequent to the end of the fourth quarter, between January 1, 2025 and January 31, 2025, NXP executed via a 10b5-1 program additional share repurchases totaling $101 million;
- On October 15, 2024, NXP introduced the S32J family of high-performance automotive Ethernet switches and network controllers to enable the next generation of software-defined vehicle development (SDV). The S32J family shares a common switch core with the NXP S32 portfolio of automotive processing devices to maximize software re-use and simplify network configuration and integration;
- On October 23, 2024, NXP announced Audi has adopted the Trimension® NCJ29Dx Ultra Wide Band (UWB) product family in its advanced UWB platform delivering precise and secure real-time localization to enable hands-free secure car access via smart mobile device and other UWB-based features. Cars featuring NXP’s Trimension UWB devices, including the Audi Q6 e-tron, will hit the road in 2024;
- On November 12, 2024, NXP announced the i.MX 94 family, the newest addition to its i.MX 9 series of applications processors, designed for industrial control, telematics, gateways, and building and energy control. The i.MX94 family includes Ethernet Time Sensitive Networking (TSN) switching capabilities;
- On November 12, 2024, NXP announced industry-first wireless battery management system (BMS) based on Ultra-Wideband (UWB) connectivity, expanding its “FlexCom” family of wired and wireless BMS solutions. The new UWB-based BMS solutions enable increased battery energy density, decoupling the mechanical and electrical development for faster time to market;
- On December 17, 2024, NXP announced it had entered into an definitive agreement to acquire Aviva Links, a provider of Automotive SerDes Alliance (ASA) compliant in-vehicle connectivity solutions in an all-cash transaction valued at $242.5 million. The acquisition of Aviva Links expands NXP’s market leading in-vehicle networking (IVN) portfolio with the industry’s most advanced ASA compliant portfolio, supporting SerDes point-to-point (ASA-ML) and Ethernet-based connectivity (ASA-MLE) with data rates up to 16 Gbps;
- On January 7, 2025, NXP announced it had entered into an definitive agreement to acquire TT Tech Auto, a leader in safety-critical systems and middleware for software-defined vehicles (SDVs). The all-cash transaction is valued at $625 million, and accelerates the NXP CoreRide platform, enabling automakers to reduce complexity, maximize system performance and shorten time to market. TT Tech Auto’s MotionWise middleware platform has a proven industry track record and is designed to manage the interconnected systems in SDVs, prioritizing safety-critical functions while ensuring seamless integration.
Original – NXP Semiconductors
