-
Magnachip Semiconductor Corporation (“Magnachip” or “Company”) announced that the Company has released a new family of 600V Super Junction Metal Oxide Semiconductor Field Effect Transistors (SJ MOSFETs) consisting of nine distinct products featuring proprietary design technology.
Magnachip’s proprietary design provides specific on-resistance (RSP) reduction of about 10%, and this result was achieved while maintaining the same cell-pitches of previous generation MOSFETs.
In addition, the new product family of 600V SJ MOSFETs is equipped with a fast recovery body diode. This diode technology significantly enhances system efficiency with reduced reverse recovery time (trr) and switching loss. Therefore, the figure of merit to evaluate general performance of MOSFETs was improved by more than 10% compared to the previous generation. As such, these 600V SJ MOSFETs can be used widely in industrial applications, such as solar inverters, energy storage systems, uninterruptible power supply systems, and a variety of electronics.
Among these new MOSFETs, the MMQ60R044RFTH product offers an exceptionally low RDS(on) of 44mΩ, making it an optimal choice for electric vehicle chargers and servers. Omdia, a global market research firm, estimates that the compound annual growth rates of Si MOSFET markets for hybrid & electric vehicles and servers will be 11% and 7%, respectively, from 2023 to 2026.
“Now that we have introduced these 600V SJ MOSFET products, we are aiming to unveil new 650V and 700V SJ MOSFET products with fast recovery body diode in the second half of 2023,” said YJ Kim, CEO of Magnachip. “These new MOSFETs represent a notable achievement for the Company, and we will build upon this success to deliver next-generation power solutions for rapidly changing market requirements and customer expectations.”
Original – Magnachip Semiconductor
-
Alpha and Omega Semiconductor Limited (AOS) announced the release of 600V αMOS7™ Super Junction MOSFETs Family. αMOS7™ is AOS’ next generation high voltage MOSFET, designed to meet the high efficiency and high-density needs of servers, workstations, telecom rectifiers, solar Inverters, EV charging, motor drives and industrial power applications.
Today’s Server power supply requires Titanium efficiency, which translates to more than 98.5% peak efficiency on both PFC and LLC stages. Active-Bridges and Bridgeless designs are easy-to-implement solutions; however, switching and driving losses, especially at light load, are still the main problems designers face. Existing technologies limited by large cell pitches and charges could hardly meet such requirements.
Next-gen SJ technologies with reduced charge but also enough robustness is in demand. Low Qrr and Trr for LLC and PSFB applications are also a must during transient and abnormal situations. AOS αMOS7™ High Voltage SJ MOSFET is the best answer for above needs.
For Solar applications, low ohmic SMD devices are becoming the new standards, aiming for reduced form factors through utilizing 3D mechanical and thermal designs. αMOS7™ provides a wide Rdson granularity and SMD package choices, such as DFN, TOLL, and Top-cooling variants.
For low Fsw applications such as Solid-State Relays or Active Bridges, FETs must meet specific SOA requirements to sustain surge and in-rush currents. αMOS7™ ensures low Rdson’s temperature coefficient and ruggedness for transient voltage and current overstresses.
The first product released – AOK050V60A7 is a 600V 50mOhm αMOS7 low ohmic device with the industry-standard TO-247 package tailored for today’s high-power AC/DC, DC/DC, and Solar Inverter stages. As the EU ERP Lot9 regulation pushes the efficiency of single PSUs to Titanium level, AOS αMOS7™ 600V low ohmic family provides an ideal solution for single, interleaved, dual boost, totem-pole, and Vienna PFCs, as well as other hard-switching topologies. The optimized capacitance of AOK050V60A7 will provide customers excellent switching performances, with fast turn-on/turn-off behaviors, while avoiding the risks of self-turn-on or shoot-through. The 50mohm device will be followed by our upcoming 32mohm, 40mohm, 65mohm, and 105mohm devices.
“The new charge balance structure makes it possible to further reduce the active area up to 50%, compared to αMOS5™, our existing solution. In general, αMOS7™ is an industry-leading high voltage SJ solution designed to address both efficiency driven and cost-driven markets,” said Richard Zhang, Senior Director of Product Line and Global Power Supply businesses at AOS.
Technical Highlights:
- Low Ohmic device with ultra-low switching losses
- Rugged Body Diode and FRD options (Reduced Qrr) available for more demanding use cases
- Rugged SOA and in-rush current capability for Solid-State Relay and Active Bridge applications
- Optimized for both High Power and Low Power SMPSes, Solar Inverters, and EV DC Charging applications
Original – Alpha and Omega Semiconductor
-
Infineon Technologies AG and Schweizer Electronic AG are collaborating on an innovative way to further increase the efficiency of chips based on silicon carbide (SiC). Both partners are developing a solution to embed Infineon’s 1200 V CoolSiC™ chips directly onto printed circuit boards (PCB). This will increase the range of electric vehicles and reduce the total system costs.
The two companies have already demonstrated the potential of this new approach: They were able to embed a 48 V MOSFET in the PCB. This resulted in a 35 percent increase in performance. SCHWEIZER contributes to this success with its innovative p²Pack® solution which enables power semiconductors to be embedded in PCBs.
“Our joint goal is to take automotive power electronics to the next level,” said Robert Hermann, Product Line Head Automotive High-Voltage Discretes and Chips, of Infineon. “The low-inductive environment of a PCB allows clean and fast switching. Combined with the leading performance of 1200 V CoolSiC™ devices, chip embedding enables highly integrated and efficient inverters that reduce overall system costs.”
“With Infineon’s 100 percent electrically tested standard cells (S-Cell), we can achieve high overall yields in the p² Pack manufacturing process,” said Thomas Gottwald, Vice President Technology at Schweizer Electronic AG. “The fast-switching characteristics of the CoolSiC chips are optimally supported by the low-inductance interconnection that can be achieved with the p² Pack. This leads to increased efficiency and improved reliability of power conversion units such as traction inverters, DC-DC converters, or on-board chargers.”
Original – Infineon Technologies
-
Toshiba Electronic Devices & Storage Corporation has launched a 150V N-channel power MOSFET “TPH9R00CQ5,” which uses the latest generation U-MOSX-H process, for switching power supplies of industrial equipment, such as that used in data centers and communications base stations.
TPH9R00CQ5 features an industry-leading low drain-source On-resistance of 9.0mΩ (max), approximately a 42% reduction from Toshiba’s existing product, “TPH1500CNH1.” Compared with Toshiba’s existing product “TPH9R00CQH,” the reverse recovery charge is reduced by about 74% and the reverse recovery time by about 44%, both key reverse recovery characteristics for synchronous rectification applications. Used in synchronous rectification applications, the new product reduces the power loss of switching power supplies and helps improve efficiency. Furthermore, compared to TPH9R00CQH, the new product reduces spike voltage generated during switching, helping lower the EMI of power supplies.
The product uses the popular, surface-mount-type SOP Advance(N) package.
Toshiba also offers tools that support circuit design for switching power supplies. Alongside the G0 SPICE model, which verifies circuit function in a short time, highly accurate G2 SPICE models, which accurately reproduce transient characteristics, are now available.
Toshiba has also developed “1 kW Non-Isolated Buck-Boost DC-DC Converter for Telecommunications Equipment” and “Three-phase Multi Level Inverter using MOSFET” reference designs that utilize the new product. They are available on Toshiba’s website from today. The new product can also be utilized for the already published “1 kW Full-Bridge DC-DC Converter” reference design.
Toshiba will continue to expand its lineup of power MOSFETs that reduce power loss, increase the efficiency of power supplies, and help to improve equipment efficiency.
Applications:
- Power supplies of industrial equipment, such as that used in data centers and communications base stations.
- Switching power supplies (high efficiency DC-DC converters, etc.)
Features:
- Industry-leading low On-resistance: RDS(ON)=9.0mΩ (max) (VGS=10V)
- Industry-leading low reverse recovery charge: Qrr=34nC (typ.) (-dIDR/dt=100A/μs)
- Industry-leading fast reverse recovery time: trr=40ns (typ.) (-dIDR/dt=100A/μs)
- High channel temperature rating: Tch (max)=175°C
Original – Toshiba
